Circuit protection device manufacturerManufacturing enterprise · focus · efficiency
notice product warnings
Hotline 137 9853 1548
Tel：137 9853 1548
1250F series 300V350V400V500V600V quick-break Patch fuse
REOMAX patch fuse is a relatively high technical content new variety in the small fuse industry. The patch fuse can be divided into a patch current fuse and a patch self-recovery fuse.
According to the size and performance of the chip current fuse can be divided into the following shape:
(1) product according to size can be divided into: 0402,0603,120624106125180810251032124512502050
(2) product according to performance can be divided into three types: fast fusing, slow fusing and enhanced fusing heat energy.
Patch self-recovery fuses can also be classified by size as 08051210,0603,1206,1812,20182920, etc. . If the chip fuse has the high request, generally uses the thin film to make, the ultra low internal resistance, applies to the overcurrent protection, like the surge and so on. Computer peripheral products, mobile phones and other communication equipment, digital cameras, monitors, batteries commonly used. There is a size to the manufacturers that can use this kind of technology.
The patch fuse can be divided into one-off patch fuse and one-off Patch self-recovery fuse. The REOMAX one-off fuse protection needs to be replaced.
There are four basic types of patch fuses:
(1) Slow Fuse/time Delay Fuse;
(2) Double Alloy Slow Fuse;
(3) Quick Reaction Fuse;
(4) extra quick reaction fuse.
The slow fuse type is ideal for circuits containing transient current surges or power-on surges. These circuits include motors, transformers, incandescent lamps, and applicable load devices.
The fast-response fuse is fast and suitable for circuits without instantaneous current surges. Ultra-quick-reaction fuses are usually connected with silver.
These fuses are often used to protect semiconductor circuits because of their current-limiting ability.
Copyright © 2021 Dongguan Reamax Electronic Technology Co., Ltd.